Member
The install went pretty easy. After the honeymoon was over I had a few problems. I know it is something I am doing but I am not sure what. I know this has been asked a hundred times and I have read the posts and still have no found my answer. Sorry if this is a tired post.
1) ZP will allow me to upload photos, but it does not display the thumbs next to the gallery link.
2) ZP would not function unless I added a folder in the ZenPhoto dir called albums. I check the config and ht files and I do not understand what I am doing wrong.
3) The link in the Gallery that has no picture is directed to another folder that exists elsewhere on my server. If I move the folder to where the link points it shows me a directory view of the contents.
I am running Windows Enterprise Server 2003 SP1
Apache/2.0.59 (Win32)
PHP 5.2.0
MySQL 5.027
I have VNC installed and also a test file under http://www.laterza.net/zenphoto/test.php
*******************************************************
**************Here is the HTACCESS File:***************
*******************************************************
`
# htaccess file for zenphoto
# NOTE: Change the RewriteBase below to the absolute path to your zenphoto directory.
<IfModule mod_rewrite.c>
RewriteEngine On
# !!! Change this to the web path (eg: http://www.example.com/photos --> /photos) !!!
RewriteBase /zenphoto
RewriteCond %{REQUEST_FILENAME} -f [NC,OR]
RewriteCond %{REQUEST_FILENAME} -d [NC]
RewriteRule ^.*$ - [R,L]
RewriteRule ^admin/?$ zen/admin.php [R,L]
RewriteRule ^page/([0-9]+)/?$ index.php?page=$1 [L,QSA]
RewriteRule ^([^/]+)/?$ index.php?album=$1 [L,QSA]
RewriteRule ^([^/]+)/page/([0-9]+)/?$ index.php?album=$1&page=$2 [L,QSA]
RewriteRule ^([^/]+)/image/(thumb|[0-9]{1,4})/([^/\]+)$ zen/i.php?a=$1&i=$3&s=$2 [L,QSA]
RewriteRule ^([^/]+)/image/([^/\]+)$ albums/$1/$2 [L]
RewriteRule ^([^/]+)/([^/\]+)$ index.php?album=$1&image=$2 [L,QSA]
</IfModule>
`
*****************************************************
************Here is the ZP-Config.php File:**********
*****************************************************
`
<?php /* PUT NOTHING BEFORE THIS LINE, not even a line break! */
$conf = array();
define("DEBUG", false);
/** Do not edit above this line. **/
/**********************************/
/////////// zenPHOTO Configuration Variables //////////////////////////////
// After you're done editing this file, load
// http://www.yoursite.com/zenphotodir/zen/setup.php
// to run the setup (of course, replacing the paths where needed).
// NOTE: web_path and server_path are no longer needed! If you're having problems
// with the auto-detected paths, you can override them at the bottom of this file.
////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////
// Database Information (the most important part!)
////////////////////////////////////////////////////////////////////////////////
$conf['mysql_user'] = "XXXXX";
$conf['mysql_pass'] = "XXXXX";
$conf['mysql_host'] = "localhost"; // Won't need to change this 90% of the time.
$conf['mysql_database'] = "mysql";
// If you're sharing the database with other tables, use a prefix to be safe.
$conf['mysql_prefix'] = "";
////////////////////////////////////////////////////////////////////////////////
// General Gallery Configuration
////////////////////////////////////////////////////////////////////////////////
// What you want to call your photo gallery.
$conf['gallery_title'] = "my photos";
// If you're in a different time zone from your server, set the offset in hours:
$conf['time_offset'] = 0;
// Tags allowed in comments
$conf['allowed_tags'] = "<a><i><em><b><strong><blockquote><abbr><acronym><ul><ol><li>";
// If you have Apache mod_rewrite, put true here, and you'll get nice cruft-free URLs.
// MAKE SURE TO EDIT THE .htaccess FILE with your path information.
$conf['mod_rewrite'] = true;
// Admin interface username (also required for running setup).
$conf['adminuser'] = "XXXXX";
// This isn't that secure, so don't put anything here you don't want anyone to see...
// (but make sure you change it to something other than 1234...)
$conf['adminpass'] = "XXXXX";
// The email for the admin user. Used to send notification emails.
$conf['admin_email'] = "blaterza@gmail.com";
// If you're running a secure server, change this to 'https' (Most people will leave this alone)
$conf['server_protocol'] = "http";
// The character encoding to use internally. Leave at UTF-8 if you're unsure.
$conf['charset'] = 'UTF-8';
////////////////////////////////////////////////////////////////////////////////
// Image Processing Configuration
////////////////////////////////////////////////////////////////////////////////
// JPEG Compression quality for all images and thumbnails (respectively):
$conf['image_quality'] = 85;
$conf['thumb_quality'] = 75;
// Default image display width (themes will be able to control this
// to an extent in the future, but for now you may have to adjust it to fit your theme).
$conf['image_size'] = 595;
// If this is set to true, then the longest side of the image will be $image_size.
// Otherwise, the *width* of the image will be $image_size.
$conf['image_use_longest_side'] = true;
// Allow images to be scaled up to the requested size? This could result in loss
// of quality, so it's off by default.
$conf['image_allow_upscale'] = false;
// Default thumbnail size and scale:
// If $thumb_crop is set to true, then the thumbnail will be a centered portion of the image
// with the given width and height after being resized to $thumb_size (by shortest side).
// Otherwise, it will be the full image resized to $thumb_size (by shortest side).
// NOTE: thumb_crop_width and height should always be less than or equal to thumb_size
$conf['thumb_size'] = 100;
$conf['thumb_crop'] = true;
$conf['thumb_crop_width'] = 85;
$conf['thumb_crop_height'] = 85;
// Paging options:
// Control of their display is done in the theme, so you might need to change these
// after switching themes to make it look better.
$conf['albums_per_page'] = 5;
$conf['images_per_page'] = 15;
////////////////////////////////////////////////////////////////////////////////
// Path Overrides
////////////////////////////////////////////////////////////////////////////////
// Uncomment the following two lines ONLY IF YOU'RE HAVING PROBLEMS.
// These allow you to override Zenphoto's detection of the correct paths
// on your server, which might work better on some setups.
////////////////////////////////////////////////////////////////////////////////
//define('WEBPATH', '/zenphoto');
//define('SERVERPATH', 'http://www.laterza.net/zenphoto');
/** Do not edit below this line. **/
/**********************************/
$_zp_conf_vars = $conf;
?>
`
Thank you for your time.
1) ZP will allow me to upload photos, but it does not display the thumbs next to the gallery link.
2) ZP would not function unless I added a folder in the ZenPhoto dir called albums. I check the config and ht files and I do not understand what I am doing wrong.
3) The link in the Gallery that has no picture is directed to another folder that exists elsewhere on my server. If I move the folder to where the link points it shows me a directory view of the contents.
I am running Windows Enterprise Server 2003 SP1
Apache/2.0.59 (Win32)
PHP 5.2.0
MySQL 5.027
I have VNC installed and also a test file under http://www.laterza.net/zenphoto/test.php
*******************************************************
**************Here is the HTACCESS File:***************
*******************************************************
`
# htaccess file for zenphoto
# NOTE: Change the RewriteBase below to the absolute path to your zenphoto directory.
<IfModule mod_rewrite.c>
RewriteEngine On
# !!! Change this to the web path (eg: http://www.example.com/photos --> /photos) !!!
RewriteBase /zenphoto
RewriteCond %{REQUEST_FILENAME} -f [NC,OR]
RewriteCond %{REQUEST_FILENAME} -d [NC]
RewriteRule ^.*$ - [R,L]
RewriteRule ^admin/?$ zen/admin.php [R,L]
RewriteRule ^page/([0-9]+)/?$ index.php?page=$1 [L,QSA]
RewriteRule ^([^/]+)/?$ index.php?album=$1 [L,QSA]
RewriteRule ^([^/]+)/page/([0-9]+)/?$ index.php?album=$1&page=$2 [L,QSA]
RewriteRule ^([^/]+)/image/(thumb|[0-9]{1,4})/([^/\]+)$ zen/i.php?a=$1&i=$3&s=$2 [L,QSA]
RewriteRule ^([^/]+)/image/([^/\]+)$ albums/$1/$2 [L]
RewriteRule ^([^/]+)/([^/\]+)$ index.php?album=$1&image=$2 [L,QSA]
</IfModule>
`
*****************************************************
************Here is the ZP-Config.php File:**********
*****************************************************
`
<?php /* PUT NOTHING BEFORE THIS LINE, not even a line break! */
$conf = array();
define("DEBUG", false);
/** Do not edit above this line. **/
/**********************************/
/////////// zenPHOTO Configuration Variables //////////////////////////////
// After you're done editing this file, load
// http://www.yoursite.com/zenphotodir/zen/setup.php
// to run the setup (of course, replacing the paths where needed).
// NOTE: web_path and server_path are no longer needed! If you're having problems
// with the auto-detected paths, you can override them at the bottom of this file.
////////////////////////////////////////////////////////////////////////////////
////////////////////////////////////////////////////////////////////////////////
// Database Information (the most important part!)
////////////////////////////////////////////////////////////////////////////////
$conf['mysql_user'] = "XXXXX";
$conf['mysql_pass'] = "XXXXX";
$conf['mysql_host'] = "localhost"; // Won't need to change this 90% of the time.
$conf['mysql_database'] = "mysql";
// If you're sharing the database with other tables, use a prefix to be safe.
$conf['mysql_prefix'] = "";
////////////////////////////////////////////////////////////////////////////////
// General Gallery Configuration
////////////////////////////////////////////////////////////////////////////////
// What you want to call your photo gallery.
$conf['gallery_title'] = "my photos";
// If you're in a different time zone from your server, set the offset in hours:
$conf['time_offset'] = 0;
// Tags allowed in comments
$conf['allowed_tags'] = "<a><i><em><b><strong><blockquote><abbr><acronym><ul><ol><li>";
// If you have Apache mod_rewrite, put true here, and you'll get nice cruft-free URLs.
// MAKE SURE TO EDIT THE .htaccess FILE with your path information.
$conf['mod_rewrite'] = true;
// Admin interface username (also required for running setup).
$conf['adminuser'] = "XXXXX";
// This isn't that secure, so don't put anything here you don't want anyone to see...
// (but make sure you change it to something other than 1234...)
$conf['adminpass'] = "XXXXX";
// The email for the admin user. Used to send notification emails.
$conf['admin_email'] = "blaterza@gmail.com";
// If you're running a secure server, change this to 'https' (Most people will leave this alone)
$conf['server_protocol'] = "http";
// The character encoding to use internally. Leave at UTF-8 if you're unsure.
$conf['charset'] = 'UTF-8';
////////////////////////////////////////////////////////////////////////////////
// Image Processing Configuration
////////////////////////////////////////////////////////////////////////////////
// JPEG Compression quality for all images and thumbnails (respectively):
$conf['image_quality'] = 85;
$conf['thumb_quality'] = 75;
// Default image display width (themes will be able to control this
// to an extent in the future, but for now you may have to adjust it to fit your theme).
$conf['image_size'] = 595;
// If this is set to true, then the longest side of the image will be $image_size.
// Otherwise, the *width* of the image will be $image_size.
$conf['image_use_longest_side'] = true;
// Allow images to be scaled up to the requested size? This could result in loss
// of quality, so it's off by default.
$conf['image_allow_upscale'] = false;
// Default thumbnail size and scale:
// If $thumb_crop is set to true, then the thumbnail will be a centered portion of the image
// with the given width and height after being resized to $thumb_size (by shortest side).
// Otherwise, it will be the full image resized to $thumb_size (by shortest side).
// NOTE: thumb_crop_width and height should always be less than or equal to thumb_size
$conf['thumb_size'] = 100;
$conf['thumb_crop'] = true;
$conf['thumb_crop_width'] = 85;
$conf['thumb_crop_height'] = 85;
// Paging options:
// Control of their display is done in the theme, so you might need to change these
// after switching themes to make it look better.
$conf['albums_per_page'] = 5;
$conf['images_per_page'] = 15;
////////////////////////////////////////////////////////////////////////////////
// Path Overrides
////////////////////////////////////////////////////////////////////////////////
// Uncomment the following two lines ONLY IF YOU'RE HAVING PROBLEMS.
// These allow you to override Zenphoto's detection of the correct paths
// on your server, which might work better on some setups.
////////////////////////////////////////////////////////////////////////////////
//define('WEBPATH', '/zenphoto');
//define('SERVERPATH', 'http://www.laterza.net/zenphoto');
/** Do not edit below this line. **/
/**********************************/
$_zp_conf_vars = $conf;
?>
`
Thank you for your time.
Member
Developer
Developer
More: after manually loading the image processor, as follows:
`http://www.laterza.net/zenphoto/zen/i.php?a=test2&i=Untitled-9.jpg&s=400`
We get this error, which means the PHP GD Extensions are not installed on your server.
`Fatal error: Call to undefined function imagecreatefromjpeg() in C:\wamp\www\zenphoto\zen\functions.php on line 57`
In a WAMP installation, that usually means that you need to load the library in your php.ini and set the appropriate paths. Not too hard if you have control over that.
`http://www.laterza.net/zenphoto/zen/i.php?a=test2&i=Untitled-9.jpg&s=400`
We get this error, which means the PHP GD Extensions are not installed on your server.
`Fatal error: Call to undefined function imagecreatefromjpeg() in C:\wamp\www\zenphoto\zen\functions.php on line 57`
In a WAMP installation, that usually means that you need to load the library in your php.ini and set the appropriate paths. Not too hard if you have control over that.
Member
OK I added the folder Cache, turned off mod_rewrite and turn on the PHP GD Extensions.
SNAP! I get thumbs now! Only problem is when I click a thumb I get "<a href=" I did read somewhere that this had to do with my theme, so I went from default to stop design. I was able to get into the page with photos but it did not look right, also I could not click the pictures and see a larger version (forbidden). I then went back to default and I get the "<a href=" error again.
We have already proven that Zen is working fine and it is my setup the needs fixed, so what did I do wrong this time? LOL. Thank you for the help!
SNAP! I get thumbs now! Only problem is when I click a thumb I get "<a href=" I did read somewhere that this had to do with my theme, so I went from default to stop design. I was able to get into the page with photos but it did not look right, also I could not click the pictures and see a larger version (forbidden). I then went back to default and I get the "<a href=" error again.
We have already proven that Zen is working fine and it is my setup the needs fixed, so what did I do wrong this time? LOL. Thank you for the help!
Member
I am looking at my php.ini and I do not see where I should make the changes, here is the Pths section:
;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;
; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
;
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"
; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
doc_root =
; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =
; Directory in which the loadable extensions (modules) reside.
extension_dir = "c:/wamp/php/ext/"
; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = On
; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
; cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; fastcgi.impersonate = 1;
; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0
;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;
; Whether to allow HTTP file uploads.
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
upload_tmp_dir = "c:/wamp/tmp"
; Maximum allowed size for uploaded files.
upload_max_filesize = 6M
^
----------------------| By changing this will I allow larger than 2MB files?
;;;;;;;;;;;;;;;;;;;;;;;;;
; Paths and Directories ;
;;;;;;;;;;;;;;;;;;;;;;;;;
; UNIX: "/path1:/path2"
;include_path = ".:/php/includes"
;
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"
; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
doc_root =
; The directory under which PHP opens the script using /~username used only
; if nonempty.
user_dir =
; Directory in which the loadable extensions (modules) reside.
extension_dir = "c:/wamp/php/ext/"
; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
enable_dl = On
; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request.
; cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; cgi.redirect_status_env = ;
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; fastcgi.impersonate = 1;
; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
;cgi.rfc2616_headers = 0
;;;;;;;;;;;;;;;;
; File Uploads ;
;;;;;;;;;;;;;;;;
; Whether to allow HTTP file uploads.
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
upload_tmp_dir = "c:/wamp/tmp"
; Maximum allowed size for uploaded files.
upload_max_filesize = 6M
^
----------------------| By changing this will I allow larger than 2MB files?
Member
Member
I found a thread from another user:
clam Member wrote:
"I fixed it for my system!
You will need to make the following change to the php.ini file on your server:
Find the line "zend.ze1_compatibility_mode = off" and change it to "zend.ze1_compatibility_mode = on" (without the quotes).
This seemed to fix the issue for my configuration... Hope that helps! "
This worked for me. Thank you Clam and Thank you Tris for your help also. This program really is the best.
clam Member wrote:
"I fixed it for my system!
You will need to make the following change to the php.ini file on your server:
Find the line "zend.ze1_compatibility_mode = off" and change it to "zend.ze1_compatibility_mode = on" (without the quotes).
This seemed to fix the issue for my configuration... Hope that helps! "
This worked for me. Thank you Clam and Thank you Tris for your help also. This program really is the best.